Wesson Electrical Services has been handling residential and commercial electrical work in Balch Springs and across Dallas County since 2005. Whether you need a tripped breaker reset and diagnosed, a full panel upgrade, new wiring for a remodel, or an EV charger installed in your garage, we do it all. We serve homeowners, landlords, property managers, and business owners throughout the area. Same-day appointments are available, and we take after-hours calls when the job can't wait.
We answer the phone. We dispatch the electrician. We keep it simple.
Call (945) 429-1659 for a quote.
Whether it's a single outlet or a full panel upgrade, the first step is figuring out exactly what's wrong. Dead outlets, breakers that keep tripping, lights that flicker when the AC kicks on, a burning smell near a switch plate, or a whole room that's lost power are all signs something in your electrical system needs attention. These are not problems to wait on.
Our electricians work through the diagnostics methodically. We check for loose connections, overloaded circuits, failing breakers, and wiring faults. We test GFCI protection in kitchens, bathrooms, garages, and outdoor areas where code requires it, and we inspect arc-fault and ground-fault breakers that protect against hidden wiring hazards. Work is performed by licensed electricians who know what to look for and how to fix it safely.
We'll find the fault and fix it right.
Getting your electrical problem handled starts with a quick call. From there, we can schedule outlet and switch repairs, replacements, and new installations for homes and commercial spaces across Balch Springs. A dead outlet, a switch that sparks, or a GFCI that won't reset are all straightforward jobs we handle every day.
We install GFCI outlets in wet areas, weatherproof outlets for exterior use, and standard outlets wherever you need more capacity. On the same visit, we can wire bathroom exhaust fans, smoke detectors, and carbon monoxide detectors to make sure everything meets current code. All wiring is grounded and bonded correctly, so you're not just getting a fix today. You're getting work done the right way.
We'll have your outlets working again in no time.
Choosing the right electrical fix is easier than it sounds, and that goes for lighting too. We install recessed lighting, ceiling fixtures, under-cabinet lighting, and LED upgrades throughout the home. Outside, we handle security lighting, motion sensor lights, and landscape lighting wiring so your property is well-lit after dark.
Ceiling fan installation and replacement is one of our most common calls. Whether you're adding a fan to a room that doesn't have one or swapping out an older unit, we handle the wiring and mounting from start to finish. For commercial clients, we also handle lighting upgrades in offices, retail spaces, and warehouses where better lighting means a safer, more productive workspace.
We'll make your wiring safe again.
North Texas weather puts real demands on electrical systems. Hot summers push air conditioning loads to their limits, and the storm season brings lightning, power surges, and outages that can knock out equipment or leave a home without power for days. The three services below come up often in this area for good reason.
If you're not sure your panel can handle the load, you're not alone. Older homes in the Balch Springs area were built for far less electrical demand than what modern households draw. Air conditioning, electric dryers, refrigerators, and home offices all compete for capacity on a panel that may not have been designed for it. We handle breaker panel replacement, 200-amp service upgrades, fuse box replacements, and subpanel installations. We run load calculations before any upgrade so you know exactly what your home or building needs. Commercial panel upgrades and service-entrance work are also part of what we do, and we can add dedicated appliance circuits at the same time to keep your system organized and code-compliant.
Texas residents know that the power grid can be vulnerable during severe weather. Thunderstorms, tornadoes, and ice events have all caused extended outages across Dallas County. A standby generator connected to your home through a properly installed transfer switch means the lights stay on, the refrigerator keeps running, and your family stays comfortable when the grid goes down. We handle the electrical side of every generator installation: the transfer switch, the wiring, and the panel connection. We work with whole-home standby units and portable generator hookups, and we make sure the installation is safe and up to code.
Texas thunderstorm season is long, and every strike near a power line can send a voltage spike through your home's wiring. A single surge can damage appliances, electronics, and HVAC equipment in seconds. Whole-home surge protection installs at the main panel and acts as the first line of defense before a spike reaches any device in the house. We install whole-house surge protectors with proper grounding and bonding so the protection actually works the way it's supposed to. Trusted by local homeowners and property managers for their electrical work, we make sure this installation is done correctly the first time.
We know schedules shift, so we keep booking flexible, and that matters when you're in the middle of a remodel or addition. Older homes throughout Dallas County sometimes carry knob-and-tube wiring or aluminum branch-circuit wiring that needs to be brought up to current standards before a renovation can move forward. We handle whole-home rewiring, knob-and-tube replacement, and aluminum wiring remediation, along with new circuit installation for any addition or remodel project.
Dedicated circuits for dryers, refrigerators, dishwashers, and other major appliances are a regular part of what we do. Kitchen remodels, bathroom remodels, garage conversions, and home additions all need an electrician involved early. We work alongside contractors and homeowners to make sure the wiring is in place before the walls go up.
Give us a ring and consider it handled.
Home electric vehicle charging has become one of the most common upgrade requests we get. A Level 2 home charging station runs on a dedicated 240-volt circuit and can charge most EVs overnight. Whether you drive a Tesla, a Ford, a Chevy, or any other electric vehicle, the installation process is the same: a dedicated EV charging circuit, the right outlet or hardwired connection, and a panel that can carry the load.
If your panel is already at capacity, we can assess whether an upgrade is needed before the charger goes in. That way there are no surprises and the installation is done right from the start. We'll make sure your home charging setup is safe, reliable, and ready for daily use.
Getting your electrical problem handled starts with knowing what you're actually dealing with. Electrical safety inspections are one of the most useful services we offer, especially for homebuyers, property managers, and owners of older homes. Balch Springs has a range of housing stock, and some of it carries wiring that hasn't been looked at in decades.
A full inspection covers your panel, your wiring, your outlets, and your grounding. We check for AFCI breaker protection in bedrooms and living areas, GFCI protection in wet locations, and any wiring conditions that present a fire or shock hazard. Pre-purchase inspections give buyers a clear picture of what they're getting into before closing. Property managers use them to stay ahead of code issues before they become expensive problems.
We live and work in this community, and it shows in our work. That means honest assessments and clear communication from the first call to the final test.
We're based in Balch Springs and serve customers throughout the surrounding area. If you're in Mesquite, Garland, Rowlett, Sunnyvale, Seagoville, or Forney, we're close by and ready to schedule. Dallas County is our home territory, and we know the neighborhoods, the housing stock, and the electrical issues that come up most often in this part of Texas.
We know schedules shift, so we keep booking flexible, with same-day availability on most jobs and after-hours service when the situation calls for it. We also take weekend calls for customers who can't be home during the week. When you call, we give you a clear quote before any work begins so you know what to expect. No surprises on the invoice.
The kind of electrical work neighbors pass along by word of mouth comes from doing the job right and treating customers fairly. That's the standard we hold ourselves to on every call, every visit, and every job we complete in the Balch Springs area.
Book today. Wired tomorrow. Done by the weekend.
We are based in Balch Springs and serve customers throughout Dallas County, including Mesquite, Garland, Sunnyvale, Seagoville, Rowlett, Forney, Hutchins, and Wilmer. If you are in the surrounding area and are not sure whether we cover your location, call (945) 429-1659 and we can confirm quickly.
Call (945) 429-1659 and tell us what you are dealing with. We will ask a few questions about the job, give you a clear sense of what is involved, and provide a quote before any work begins. There are no surprises on the invoice.
Yes. We serve homeowners, landlords, property managers, small business owners, and commercial clients throughout Balch Springs and the surrounding area. Office buildouts, retail spaces, warehouses, and multi-tenant buildings are all part of what we handle.
Stop resetting it and call an electrician. A breaker that trips repeatedly is telling you the circuit is overloaded, there is a wiring fault, or the breaker itself is failing. Continuing to reset it without diagnosing the cause can create a fire hazard.
We keep scheduling flexible and have same-day availability on most jobs. For larger projects like panel upgrades or full rewiring, a little advance notice helps us plan materials and time, but we will always work to get you on the calendar as quickly as possible.
Flickering lights, breakers that trip repeatedly, outlets that are warm or discolored, a burning smell near a switch or panel, or a room that has lost power entirely are all signs that need prompt attention. These symptoms often point to a wiring fault, a failing breaker, or an overloaded circuit that should not be left alone.
We give you a clear quote before any work starts, and we stick to it. If we open a wall or panel and find something unexpected that changes the scope, we will explain what we found and what it costs before we proceed. You are never committed to work you have not approved.
A brief description of the problem or project is usually enough to get started. For larger jobs like a panel upgrade or a whole-home rewire, knowing the age of the home, the current panel size, and what you are trying to add or fix helps us give you a more accurate number on the first call.
Wesson Electrical Services handles everything from a single tripped breaker to a full-home rewire, and we serve both residential and commercial customers throughout Balch Springs and Dallas County. Twenty-one years in this business means we've seen it all and fixed it all.
We answer the phone. We dispatch the electrician. We keep it simple.
Call (945) 429-1659 for a quote.
We handle the full range of residential and commercial electrical work in Balch Springs and across Dallas County, from a single tripped breaker to a complete home rewire. The table below lays out what each service covers, who it is a good fit for, and a practical note to help you plan. If you want a straight answer on what your job involves and what it will cost, a quick call gets you there faster than any table can.
| Electrical Service | What the Job Involves | Ideal For | Worth Knowing |
|---|---|---|---|
| Wiring for Additions and Remodels |
| homeowners mid-remodel or planning an addition who need an electrician involved early | Getting the wiring roughed in before walls close saves significant time and cost. We work alongside contractors and can coordinate scheduling around your project timeline. |
| Electrical Panel Upgrades |
| homes with an undersized or aging panel that cannot keep up with modern electrical demand | North Texas summers push AC loads hard, and older panels were not built for today's appliance mix. A load calculation before the upgrade tells you exactly what size service your home needs. |
| Basement and Sump-Pump Circuits |
| homeowners adding or upgrading a sump pump or finishing a basement space | A sump pump on a shared circuit can lose power at exactly the wrong moment. A dedicated circuit with proper GFCI protection is the right way to wire this work. |
| Breaker and Fuse Repair |
| homes and businesses with an older panel or a breaker that will not hold | A breaker that keeps tripping is telling you something. We diagnose the cause before replacing hardware so the fix actually solves the problem rather than masking it. |
| Whole-Home Surge Protection |
| homeowners with sensitive electronics, appliances, or HVAC equipment to protect | Texas thunderstorm season runs long, and a single nearby lightning strike can send a damaging voltage spike through your wiring. Panel-level protection stops the surge before it reaches any device in the house. |
| Outlet and Switch Installation |
| homeowners adding capacity or replacing damaged or non-code outlets | Kitchens, bathrooms, garages, and outdoor areas require GFCI protection under current code. If your home is older, a quick inspection can show you where you stand. |
| Ceiling Fan Installation |
| homeowners adding a fan to a room or replacing an older unit | Rooms without an existing ceiling box need a rated fan brace installed before mounting. We handle that as part of the same visit so there are no follow-up trips. |
| Dedicated Appliance Circuits |
| homeowners adding a major appliance or converting a garage or workshop space | Major appliances need their own circuit to run safely and efficiently. Sharing a circuit with other loads can cause nuisance tripping and, over time, wiring damage. |
| Electrical Safety Inspections |
| homebuyers, property managers, and owners of homes that have not been inspected in years | Balch Springs has a range of housing ages, and some older homes carry wiring that has not been looked at in decades. An inspection gives you a clear picture of what you have and what, if anything, needs attention. |
| Electrical Repairs and Troubleshooting |
| any homeowner or business owner with an unexplained electrical problem | Repeated tripping or a burning smell near a panel or outlet should not wait. These symptoms often point to a wiring fault or failing breaker that can become a fire hazard if left unattended. |
| Lighting Installation |
| homeowners upgrading interior lighting or adding outdoor security lighting | Exterior lighting wiring needs to be weatherproofed and grounded correctly. We handle the full installation so the fixture and the wiring behind it are both done right. |
| EV Charger Installation |
| EV owners who want reliable overnight home charging | If your panel is already near capacity, we assess it before the charger goes in. That way the installation is done right from the start and there are no surprises later. |
| Backup Generator Installation |
| homeowners and businesses who need reliable power during storms or grid outages | Dallas County sees severe thunderstorms, tornadoes, and ice events that can knock out power for days. A properly wired transfer switch keeps the generator from back-feeding the grid, which is a serious safety requirement. |
| Older-Home Rewiring |
| owners of older Dallas County homes with outdated or ungrounded wiring | Knob-and-tube and aluminum branch-circuit wiring are not just code concerns. They carry real fire and shock risks that modern wiring eliminates. Work is performed by licensed electricians familiar with older housing stock. |
What are the signs that my electrical panel needs to be upgraded?
Breakers that trip often, a panel that feels warm to the touch, lights that dim when large appliances kick on, and a fuse box that has not been updated in decades are all signs worth paying attention to. Homes in the Dallas area were often built with panels sized for far less demand than a modern household draws. If you are adding an EV charger, a hot tub circuit, or central air to an older home, a load calculation will tell you whether your current service can handle it.
Why does my breaker keep tripping even after I reset it?
A breaker that trips repeatedly is responding to something real: an overloaded circuit, a wiring fault, or a breaker that is failing on its own. Resetting it without diagnosing the cause does not fix the underlying problem and can create a fire hazard over time. The right move is to stop resetting it and call an electrician to trace the fault.
Is electrical work in Balch Springs permitted and inspected?
Most electrical work beyond simple fixture swaps requires a permit and inspection under Texas and local code. We handle the work to code on every job, and we can walk you through what the permit process involves for your specific project. Permitted work also protects you when it comes time to sell the home.
Work Performed by Licensed Electricians
Every job we take on is handled by licensed electricians who know the code and know how to do the work safely. That applies to a single outlet replacement and a full panel upgrade alike.
How do I know if the wiring in my older home is still safe?
Age alone does not make wiring unsafe, but certain types of older wiring, including knob-and-tube and aluminum branch-circuit wiring, carry risks that modern wiring does not. Signs of concern include outlets that are warm or discolored, a burning smell near switches or the panel, or circuits that trip without an obvious cause. An electrical safety inspection gives you a clear picture of what is in your walls and whether anything needs to be addressed.
What does EV charger installation involve?
A Level 2 home charger runs on a dedicated 240-volt circuit, which is the same type of circuit a dryer or range uses. We run the circuit from your panel to the garage or wherever you park, install the outlet or hardwire the charger, and verify the panel has the capacity to carry the added load. If an upgrade is needed, we handle that first so the installation goes in correctly from the start.
Do I need to be home while the work is being done?
For most jobs, yes, we need access to the panel and the areas where we are working. For larger projects like a panel upgrade or a rewire, having someone available to answer questions during the job helps things move smoothly. We will let you know at booking what access we need so there are no delays on the day of the visit.
Upfront Quotes With No Surprise Fees
We give you a clear number before any work begins, and we do not change it without your approval. If we find something unexpected, we explain it and get your go-ahead before we proceed.
How does pricing work, and will the quote change after the electrician arrives?
We give you a clear quote before any work starts and we stick to it. If we open a wall or panel and find something unexpected that changes the scope of the job, we explain what we found and what it costs before we proceed. You are never committed to work you have not approved.
What is the risk of a warm or buzzing outlet?
A warm outlet or one that buzzes or sparks when you plug something in is a sign of a loose connection, an overloaded circuit, or wiring that is deteriorating. These are not cosmetic issues. They are fire and shock hazards that need to be looked at by an electrician, not left alone or covered with a new face plate.
Same-Day and Emergency Availability
We keep scheduling flexible and have same-day availability on most jobs. For situations that cannot wait, we take after-hours calls and do our best to get someone out quickly.
How does whole-home surge protection work, and is it worth it?
A whole-home surge protector installs at your main panel and intercepts voltage spikes before they reach any outlet or appliance in the house. Texas thunderstorm season is long, and surges from nearby lightning strikes can damage appliances, electronics, and the equipment connected to your HVAC circuits in seconds. Panel-level protection is the most effective first line of defense, and it does not interfere with anything else in your electrical system.
What should I know about aluminum wiring in older homes?
Aluminum branch-circuit wiring was common in homes built in the 1960s and 1970s. It expands and contracts more than copper, which can loosen connections over time and create heat and fire risks at outlets and switches. Remediation does not always mean a full rewire. In many cases, we can use approved connectors and devices to bring the system to a safe standard. An inspection will tell you what your home has and what the right approach is.
How long does a panel upgrade or home rewire take?
A panel upgrade typically takes one day for a straightforward residential job, though homes that need a service-entrance upgrade or significant panel work may run a bit longer. A whole-home rewire is a larger project and usually takes several days depending on the size of the home and the condition of the existing wiring. We give you a realistic timeline before we start so you can plan around it.
Call (945) 429-1659 and tell us what you are dealing with. We will ask a few questions, give you a straight answer on what the job involves, and provide a quote before anything is scheduled.
(945) 429-1659