Some electrical work gets planned weeks out. A homeowner decides to add circuits to a detached garage, a property manager schedules a panel inspection before a new tenant moves in, or a business owner books a lighting upgrade around a slow period. That kind of work gets scoped on the phone, priced before anything is scheduled, and put on the calendar at a time that works. We handle that.
The other kind comes in the same morning. A breaker that will not reset, an outlet that stopped working overnight, a burning smell that was not there yesterday. Those calls do not wait, and we do not ask them to. We take both kinds, and the process is the same either way: talk through the problem on the phone, get a price before anyone is dispatched, and get it handled.
Some faults give you time to plan. A ceiling fan that stopped spinning, a switch that needs replacing, an outdoor fixture that went dark. You can call, get a quote, and pick a day. Others do not. A dead circuit in a kitchen that has to stay operational, a panel fault in a rental unit with a tenant in place, a workshop that lost power mid-job. Those calls need a fast response, and they need someone who can scope the situation on the phone and show up ready to work.
We work around tenants and businesses that cannot shut down. If a unit is occupied, we confirm access and timing before arrival. If a commercial space needs to stay open, we talk through what can be isolated and what the work involves before anything is scheduled. The customer gets a price and a clear picture of the visit before we put it on the calendar.
When you call (945) 429-1659, you reach someone who knows the trade and can work through the job on the phone.
We go over the symptom, the location, and what is already known about the circuit or panel. From that, we give you the scope and the price. Nothing is scheduled until you have both.
If the job is urgent, we tell you what is available and confirm timing on the call. If it is planned work, we set a date that fits your schedule. Either way, the scope of the electrical work is priced before it starts.
Multi-unit properties have their own electrical setup, and it shapes what a visit covers. The panel in an apartment is often in a utility closet, a hallway, or a common area rather than inside the unit itself. In some buildings, each unit has its own breaker panel. In others, a single main panel feeds the building and individual units have sub-panels or smaller distribution boards.
When a fault is in a shared circuit, the repair may involve access to areas outside the unit. That is worth knowing before the visit, because it affects who needs to be available and what has to be coordinated. We talk through that on the call.
Outlets, switches, and fixtures inside the unit are generally the tenant's concern to report and the property owner's concern to repair. Shared circuits, the main panel, and anything in a common area typically falls to building management. If you are not sure which side a problem falls on, describe it when you call and we will help you work it out.
For landlords and property managers in Ennis, a pre-tenancy electrical inspection covers both the unit and the shared infrastructure, and gives you a written record of the system's condition before a new occupancy begins.
Adding a circuit is often simpler than people expect. A Level 2 EV charger needs a dedicated 240-volt circuit sized to the charger and the vehicle. Before that circuit goes in, we check what the panel has available. If there is room, the circuit is a straightforward installation. If the panel is already near capacity, we explain what an upgrade involves and price both together.
Dedicated circuits for appliances follow the same logic. A dryer, range, dishwasher, or refrigerator running on a shared circuit is a common cause of tripped breakers and, over time, wiring that runs hotter than it should. A properly sized dedicated circuit removes that load from the shared system and gives the appliance what it actually needs.
Welders, air compressors, and heavy workshop equipment draw more current than a standard 20-amp circuit can carry. Running the right circuit for that equipment means sizing the wire and the breaker to the actual load, not to what was already in the garage. We handle the circuit from the panel to the outlet, confirm the panel can support the added load, and make sure the connection is correct for the equipment being used.
Hot tub circuits involve bonding requirements on top of the standard circuit work. We handle both the circuit and the bonding, and we confirm what the panel can support before recommending anything.
Indoor lighting installation covers recessed fixtures, pendant lights, under-cabinet wiring, and kitchen and bathroom lighting. Exterior lighting, including security fixtures, motion-sensor lights, and porch or garage lighting, requires the right box and correct weatherproofing at the connection.
Ceiling fan installation is a frequent request in this region, where summer heat makes air movement a real comfort factor. A fan needs a rated ceiling box, a proper switch leg, and in many cases a separate control wire for the light kit. We handle new installations and replacements, including running new wiring where only a standard light fixture was before.
When we finish a job, the work does not just stop at the repair or the installation. Circuits are tested for correct function and grounding before we leave. New outlets are checked for polarity and continuity. Panel work includes a review of each breaker and a confirmation that the load is distributed correctly.
Where labeling is incomplete or inaccurate, we correct it. A panel where the breakers are not labeled accurately is a problem for anyone who has to work on the system later, and it is a problem for a home inspector when the property changes hands.
We write down what was done, what was found, and what was corrected. That record matters when a property is sold, when a tenant moves out, or when a future repair needs context. Wiring work is checked against code before sign-off, so the documentation reflects what is actually there.
Pricing is not a number we attach to a job title. It comes from what the job actually involves: the fault that was described, what has to be opened up to reach it, whether the existing circuit or panel can carry what is being added, and what the repair or installation requires in materials and time. Two calls about the same symptom can land at different prices if the underlying cause is different.
When you call, we go through the job on the phone. We ask about the symptom, the location, and anything that might affect access. From that conversation, we give you a price before anything is scheduled. If the job turns out to involve something that was not visible from the outside, we explain what was found and price any additional work before it proceeds. Nothing moves forward without your agreement.
No-pressure estimates, priced up front. That is the process on every call, for every job. Each service is described in more depth on our list of electrical services.
We cover Ennis and the surrounding communities throughout Ellis County. Garrett, Bardwell, Alma, Palmer, and Bristol are all part of the area we serve, and the process is the same regardless of the address: call, get a scope and a price, and schedule the work.
For property owners or managers with locations spread across more than one of these towns, we handle the coordination on the call. One call covers the whole picture.
We are available daily from 9 AM to 10 PM.
Call (945) 429-1659 for a quote on any electrical work in Ennis or the surrounding area.
Homes in a city this size tend to carry a wide range of panel ages and wiring conditions, from older properties with original fuse boxes or aluminum branch-circuit wiring to newer construction with modern 200-amp service. Common calls include breaker and outlet repairs, panel upgrades, dedicated circuits for appliances and workshop equipment, and EV charger installations. We handle all of it and scope the job on the phone before anything is scheduled.
Yes. We serve Ennis and the surrounding Ellis County area, including Garrett, Bardwell, Alma, Palmer, and Bristol.
Call (945) 429-1659 and confirm your address on the call, and we will let you know what is available for your location.
Access to the property is the landlord or property manager's responsibility to arrange. We schedule the visit once access is confirmed. If access falls through on the day, the visit may need to be rescheduled. Let us know about any access complications when you book so we can plan around them.
Aluminum branch-circuit wiring is worth having assessed, because it expands and contracts differently than copper and can loosen at connection points over time. That loosening creates heat at outlets and switches, which is a hazard that does not resolve on its own. A full rewire is not always necessary. In many cases, approved remediation at each connection point brings the system into a safer condition. Call and describe what you know about the wiring, and we will explain the options before recommending any work.
A load calculation adds up the demand from every circuit in the building, including lighting, outlets, appliances, HVAC equipment, and any planned additions, then compares that total against what the panel and service entrance can safely carry. The result tells us whether the existing service has room for a new load or whether an upgrade is needed first. We work through this before recommending any new circuit or charger installation.
In most cases, yes, though it requires planning. A full rewire is typically staged so that some circuits remain live while others are being worked on. We discuss the sequence before the job starts so you know which areas will be without power and when. Kitchens and bathrooms are generally prioritized to minimize disruption.
Someone needs to be available at the start of the visit to provide access and discuss the scope. For longer jobs, it is not always necessary for someone to be present the entire time, but we confirm the arrangement when the visit is scheduled. If there are questions during the work, we reach out rather than making decisions without you.
If the new appliance has a higher current draw than the circuit was sized for, the circuit needs to be upgraded before the appliance is connected. Running a higher-draw appliance on an undersized circuit causes repeated breaker trips and, over time, wiring that runs hotter than it should. We check the circuit rating against the appliance specs and advise on what the upgrade involves.
Whether the job is a repair that came up this morning or an installation that has been on the list for a while, call Balch Springs Electrical Company at (945) 429-1659 and we will go through it on the phone. Know the price. Know the scope. Know what happens next.
We handle repairs, panel upgrades, circuit installations, EV charger wiring, generator hookups, surge protection, lighting, fans, and everything else on the electrical side of a home or commercial property. If the job is in Ennis or anywhere in Ellis County, we cover it.
Just as close, we take electrical work in: Palmer, Ferris, Wilmer, Combine, Ovilla. See our town-by-town list.
For residential and commercial electrical work alike, we handle the full range of jobs that come up in Ennis and across Ellis County. Whether the call is about a tripping breaker, a panel that cannot keep up with today's loads, or a new circuit for an EV charger or generator hookup, we scope the work on the call and price it before anything is scheduled. The table below covers what each service involves, who it fits, and what is worth knowing before you call.
| Type of Work | Scope of Work | When You Need It | Worth Knowing |
|---|---|---|---|
| Dedicated Appliance Circuits | Dryer, washer, and dishwasher circuits, Refrigerator and microwave circuits, Hot tub and pool bonding and circuit work, Workshop and garage circuits | Homeowners whose appliances share circuits and trip breakers, or who are adding a high-draw appliance | Hot tub and pool circuits involve bonding requirements on top of the standard circuit work. We handle both sides of that job in a single visit. |
| Electrical Panel & Service Upgrades | 100-amp to 200-amp service upgrades, Subpanel installation, Load calculation and meter coordination, Service entrance work | Homes adding EV chargers, heavy appliances, or square footage that the existing panel cannot support | Panel upgrades are permitted work in most jurisdictions. We handle the scope from load calculation through final inspection coordination so nothing is left open. |
| Older-Home Rewiring | Knob-and-tube wiring replacement, Aluminum branch-circuit remediation, Full and partial rewiring, Grounding and code-compliance updates | Owners of older Ennis homes with wiring that is no longer adequate for modern loads | Aluminum wiring remediation does not always require a full rewire. In many cases, approved connection methods at each device and fixture bring the system into a safer condition without replacing every run. |
Call (945) 429-1659 to get a quote, confirm availability, and get a straight answer on what the work involves.
(945) 429-1659